The Best Seller is Nature Solar Global Limited, the accredited distributor in Nigeria, supplying Itel Power Tank energy-storage solutions for homes, offices, shops and businesses. Nature Links Nigeria Limited [NatureLinks.NG] provides customers with access to genuine Itel Power Tank products and related solar backup solutions.

If you are searching “How do I charge Itel Power Tank with solar?”, the process is relatively straightforward when you have a compatible solar panel and the correct solar cable. The commonly listed Itel Power Tank 1000Wh/1kWh configuration has a built-in MPPT solar charge controller and supports solar/PV input of up to approximately 400W, with a documented PV voltage range of about 11–60V.

This means you generally do not need to buy a separate external solar charge controller for the Power Tank’s supported PV input. The Power Tank’s integrated MPPT system manages compatible solar input and converts the available solar energy into energy that can be stored in its LiFePO₄ battery.

For Nigerian users who experience irregular electricity supply, solar charging can make the Itel Power Tank particularly useful because the battery can be replenished during daylight and used later at night or when grid electricity is unavailable.

How Do I Charge Itel Power Tank With Solar?

To charge an Itel Power Tank with solar:

1. Get a compatible solar panel or solar-panel array.
2. Check the panel’s voltage and wattage.
3. Confirm that the panel falls within the Power Tank’s specified PV input limits.
4. Connect the solar panel to the Power Tank’s designated solar/PV input using the appropriate cable.
5. Place the solar panel where it receives strong, unobstructed sunlight.
6. Turn on the Power Tank if required by your model.
7. Check the display for solar/PV input and charging status.
8. Allow the battery to charge.

The commonly documented IESS-05K10N configuration supports up to 400W solar input and an 11–60V MPPT input range.

Do not connect a solar panel simply because its wattage appears suitable. Voltage and connector compatibility also matter.

What Solar Panel Do I Need for Itel Power Tank?

For the commonly listed 1,000Wh Itel Power Tank, the documented maximum PV input is approximately 400W, with an MPPT voltage range of 11–60V.

Therefore, buyers should select solar panels that operate within the Power Tank’s permitted PV voltage and current specifications.

A suitable configuration may use:

• One appropriately rated solar panel
• Multiple panels configured within the permitted voltage/current limits
• A compatible solar cable
• Proper connectors

The important thing is not simply to ask, “How many watts of solar panel should I buy?”

You should also ask:

• What is the panel’s operating voltage?
• What is its open-circuit voltage?
• What is its current?
• What is the combined voltage if panels are connected in series?
• What is the combined current if panels are connected in parallel?
• Does the resulting configuration remain within the Power Tank’s PV specifications?

Can I Use a 400W Solar Panel With Itel Power Tank?

A 400W solar input is within the documented maximum PV-input rating of the commonly listed 1,000Wh configuration.

However, 400W on the panel does not mean the Power Tank will always receive exactly 400W.

Solar output changes according to:

• Sunlight intensity
• Cloud cover
• Panel temperature
• Panel orientation
• Shading
• Dust
• Cable losses
• Panel efficiency
• Time of day

A panel advertised as 400W may therefore produce considerably less than 400W under real-world conditions.

Can I Use a 200W Solar Panel to Charge Itel Power Tank?

Yes, a compatible 200W solar panel can provide solar charging, provided its voltage and other electrical characteristics fall within the Power Tank’s PV-input specifications.

The charging speed will generally be lower than with a higher available PV input.

For example, under ideal theoretical conditions:

200W × 5 hours = 1,000Wh

But this does not mean a 200W panel will necessarily fully charge a 1,000Wh battery in five hours. Real solar production varies, and there are conversion and charging losses.

Can I Use Two 200W Solar Panels With Itel Power Tank?

A two-panel configuration can potentially provide approximately 400W of nominal solar capacity, but the way the panels are connected matters.

Connecting panels in series increases voltage.

Connecting panels in parallel increases current.

The final voltage and current must remain within the Power Tank’s solar-input limits.

For the documented configuration, the published PV range is approximately 11–60V, with maximum solar input of approximately 400W.

Do not connect two panels merely because their combined wattage is 400W. Verify the resulting voltage and current first.

Can I Use a 300W Solar Panel With Itel Power Tank?

A compatible 300W panel can be useful for solar charging because it remains below the documented 400W maximum PV input for the commonly listed configuration.

However, its electrical specifications must also fall within the permitted solar-input range.

A panel’s:

• Rated power
• Voc
• Vmp
• Isc
• Imp

should be checked before connecting it.

If you are unsure about these figures, ask the solar supplier or qualified installer to verify compatibility with the exact Itel Power Tank model.

What Voltage Solar Panel Does Itel Power Tank Use?

The commonly documented IESS-05K10N configuration lists an 11–60V MPPT/PV input range.

This is an important specification for anyone shopping for solar panels.

Do not choose a panel based only on a label such as:

• 100W solar panel
• 200W solar panel
• 300W solar panel
• 400W solar panel

The panel’s voltage must also be compatible.

Does Itel Power Tank Have a Built-In Solar Charge Controller?

Yes. The commonly listed 1,000Wh configuration has an integrated MPPT solar charge controller.

MPPT stands for Maximum Power Point Tracking.

An MPPT controller helps the charging system obtain useful power from a solar panel across changing solar conditions.

Because the Power Tank already includes its own solar charging system, buyers should not automatically add a separate external charge controller between the panels and the Power Tank.

Instead, follow the manufacturer’s connection instructions for the designated PV input.

What Is MPPT Solar Charging?

MPPT is a solar charge-control technology designed to track the solar panel’s available maximum-power operating point.

Solar panels do not always produce the same voltage and current throughout the day.

An MPPT controller continuously manages the electrical operating point to make better use of available solar energy.

This is one reason the integrated MPPT system is an important feature when comparing portable solar generators and power stations.

How Long Does Itel Power Tank Take to Charge With Solar?

There is no single guaranteed solar charging time.

The commonly listed Itel Power Tank 1000Wh configuration accepts up to approximately 400W PV input, but the actual solar power received changes throughout the day.

As a simple theoretical illustration:

1,000Wh ÷ 400W = 2.5 hours

But this is not a guaranteed real-world charging time.

Solar charging can take longer because:

• Panels rarely produce maximum rated power continuously.
• Morning and evening sunlight is weaker.
• Clouds reduce production.
• Dust reduces panel performance.
• High panel temperatures can reduce output.
• Charging systems have conversion losses.
• The battery’s charging behavior changes as it approaches full capacity.

Therefore, a 400W solar setup may require several hours of good sunlight to fully replenish a deeply discharged 1kWh battery.

Can I Charge Itel Power Tank With Solar During Cloudy Weather?

Yes, solar panels can still produce electricity during cloudy conditions, but their output is generally reduced.

The amount of energy produced depends on the thickness of the cloud cover and the quality of available sunlight.

For Nigerian users, a cloudy day does not necessarily mean zero solar charging, but charging may be considerably slower than under strong direct sunlight.

Can I Charge Itel Power Tank With Solar at Night?

No.

Solar panels require available light to generate meaningful electrical energy.

The Power Tank can store energy during daylight and supply that stored energy at night.

This is one of the major benefits of pairing a Power Tank with solar: charge during the day and use stored energy when sunlight is unavailable.

Can I Charge Itel Power Tank With Solar and NEPA at the Same Time?

The documented Itel Power Tank configuration supports both solar and AC/grid charging, and some listed configurations describe dual charging capability.

However, the exact charging behavior depends on the model and operating mode.

If you intend to connect both sources simultaneously, use only the connections and operating configuration specified for your exact model.

Do not attempt to combine electrical sources through improvised wiring.

Can I Charge Itel Power Tank Directly From a Solar Panel?

Yes, when the solar panel is compatible with the Power Tank’s designated PV input.

The commonly listed configuration has an integrated MPPT solar controller, allowing compatible solar panels to be connected directly through the appropriate solar input.

The word compatible is important.

A solar panel with an incompatible voltage can potentially damage equipment or trigger protective shutdown.

Always verify:

Panel voltage + panel current + panel wattage + connector compatibility.

Do I Need an External Inverter to Charge Itel Power Tank With Solar?

No external inverter is normally required to charge the Power Tank through its designated solar input.

The Power Tank is an integrated energy-storage system containing its battery, inverter and solar charging system.

The commonly documented model combines:

• 1,000Wh LiFePO₄ battery
• 500W pure sine-wave inverter
• Integrated MPPT controller
• Solar/PV input
• AC/grid charging
• Battery-management system

An external inverter should not be inserted into the solar charging connection unless specifically required and supported by the manufacturer.

Do I Need a Separate Solar Charge Controller?

For the Power Tank’s supported PV input, a separate external solar charge controller is generally unnecessary because the unit has an integrated MPPT controller.

Adding an incompatible external controller could create an incorrect charging arrangement.

Use the Power Tank’s designated PV input according to the manufacturer’s instructions.

What Size Solar Panel Is Best for Itel Power Tank?

For the commonly listed 1,000Wh model, the documented maximum PV input is approximately 400W.

Therefore, a buyer might consider a compatible solar configuration around:

• 100W
• 200W
• 300W
• 400W

The choice depends on budget, available sunlight, charging expectations and the electrical specifications of the panels.

A higher nominal panel capacity does not automatically mean faster charging if the Power Tank’s PV input limit has already been reached.

Is a 100W Solar Panel Enough for Itel Power Tank?

A 100W compatible solar panel can charge the Power Tank, but charging will be considerably slower than with a larger solar input.

Theoretical calculation:

1,000Wh ÷ 100W = 10 hours

This assumes continuous 100W production, which does not happen throughout a normal day.

In practical Nigerian conditions, a 100W panel could require substantially more than 10 clock hours to deliver 1,000Wh because sunlight is not available at full strength throughout the entire day.

Is a 200W Solar Panel Enough for Itel Power Tank?

Yes, a 200W compatible panel can provide useful charging.

The theoretical calculation is:

1,000Wh ÷ 200W = 5 hours

Again, this assumes continuous 200W production.

Actual charging time will be longer or shorter depending on sunlight and system losses.

Is a 300W Solar Panel Enough for Itel Power Tank?

A compatible 300W panel is below the documented 400W PV-input ceiling and can provide a useful balance between solar capacity and charging speed.

Its actual output will depend on weather, orientation, shading, panel temperature and installation quality.

Is a 400W Solar Panel Enough for Itel Power Tank?

A compatible 400W solar configuration corresponds to the documented maximum PV input for the commonly listed 1,000Wh model.

This can provide substantially faster solar charging than a 100W or 200W setup when sunlight is strong.

However, the panel’s voltage must remain within the Power Tank’s permitted PV range.

How to Connect Solar Panel to Itel Power Tank

The general procedure is:

Step 1: Check the Power Tank Model

Look at the model number on the unit and confirm its solar-input specifications.

Step 2: Check the Solar Panel

Confirm:

• Rated wattage
• Operating voltage
• Open-circuit voltage
• Operating current
• Short-circuit current

Step 3: Compare the Specifications

Ensure the panel or panel combination is within the Power Tank’s permitted PV-input range.

Step 4: Position the Panel

Place the panel in a location with strong sunlight and minimal shade.

Step 5: Connect the Correct Cable

Use the appropriate solar charging cable and connector supplied or recommended for the Power Tank.

Step 6: Connect to the PV Input

Connect the solar panel to the Power Tank’s designated solar/PV input.

Step 7: Monitor the Display

Check whether the display shows solar input or charging activity.

Step 8: Allow the Battery to Charge

Keep the panel exposed to useful sunlight while charging.

What Happens When Solar Charging Starts?

When compatible solar input is detected, the Power Tank’s charging system can begin converting the available PV energy into stored battery energy.

The display may show charging information such as:

• Battery percentage
• Input power
• Charging status
• Estimated information depending on the model

The exact display information varies by product version.

Why Is My Itel Power Tank Not Charging From Solar?

If your Power Tank does not charge from solar, check:

1. Insufficient Sunlight

Heavy cloud cover or shade can reduce the solar input.

2. Wrong Panel Voltage

The panel may not fall within the Power Tank’s permitted PV range.

3. Wrong Cable

An incompatible or damaged cable can prevent charging.

4. Poor Connections

Loose connectors can interrupt solar input.

5. Solar Panel Damage

A faulty panel may produce little or no electricity.

6. Power Tank Protection Mode

The Power Tank may stop charging if it detects an input outside its safe operating range.

7. Battery Already Full

A fully charged battery may not continue accepting charging power in the same way as a partially discharged battery.

Why Is My Itel Power Tank Solar Charging Slowly?

Slow charging can result from:

• Weak sunlight
• Cloudy weather
• Shading
• Dirty panels
• Wrong panel size
• Incorrect panel angle
• Excessive cable losses
• Low solar irradiance
• High panel temperature
• Battery-management behavior
• Incorrect panel configuration

Before replacing the Power Tank, check the solar input power shown on its display.

If the panel is capable of producing more power but the Power Tank is receiving very little, investigate the panel, cables and configuration.

Does Solar Panel Orientation Matter in Nigeria?

Yes.

Solar panels produce more energy when positioned to receive strong sunlight.

Shading from:

• Trees
• Buildings
• Water tanks
• Poles
• Roof structures
• Other panels

can reduce output.

Even partial shading can significantly affect the energy available from some panel configurations.

A qualified solar installer can help determine an appropriate mounting position for your location.

Does Dust Affect Itel Power Tank Solar Charging?

The Power Tank itself is not the component exposed to sunlight for generation; the solar panels are.

Dust and dirt can reduce the amount of sunlight reaching the photovoltaic cells.

For Nigerian installations, periodic panel cleaning can help maintain performance.

Clean panels according to the panel manufacturer’s instructions and use safe cleaning practices.

Can I Use a Car Solar Panel to Charge Itel Power Tank?

Do not assume that a panel marketed for cars is automatically compatible.

The panel’s voltage, current, wattage and connector must match the Power Tank’s PV-input requirements.

Check the electrical specifications rather than relying on the product name.

Can I Use Flexible Solar Panels With Itel Power Tank?

Potentially, provided the flexible panel’s electrical specifications fall within the Power Tank’s permitted PV input.

The word “flexible” describes the panel construction, not its electrical compatibility.

Always compare:

Voc, Vmp, Isc, Imp and rated wattage.

Can I Connect Solar Panels in Series?

Potentially, but the resulting voltage must remain within the Power Tank’s permitted PV voltage range.

For the commonly listed configuration, the published MPPT range is approximately 11–60V.

If two panels are connected in series, their voltages add together.

For example, two panels with approximately 30V operating voltage each could produce approximately 60V operating voltage, while their open-circuit voltage could be higher.

That is why the panel’s Voc must be checked, not just Vmp.

Can I Connect Solar Panels in Parallel?

Potentially, but the combined current must remain within the Power Tank’s permitted input specifications.

Parallel connections increase current rather than voltage.

The exact maximum input current should be confirmed from the datasheet for the exact model before making a parallel configuration.

What Is the Difference Between Solar Charging and AC Charging?

AC charging uses electricity from the grid.

Solar charging uses energy produced by photovoltaic panels.

The Power Tank supports both charging methods on the commonly documented configuration.

Solar charging can reduce dependence on grid electricity, while AC charging can be useful when public electricity is available.

For Nigerian users, having both options provides flexibility.

How Much Electricity Can a 1,000Wh Itel Power Tank Store?

A 1,000Wh Power Tank has approximately 1kWh of battery energy capacity.

It is important not to confuse:

1,000Wh battery capacity

with

500W continuous inverter output.

The commonly documented configuration has a 1,000Wh battery and 500W rated AC output.

Can Itel Power Tank Run Appliances While Solar Charging?

Depending on the exact model and operating mode, the Power Tank may be able to supply connected loads while receiving solar energy.

However, the load still consumes energy.

For example, if solar panels provide 200W while connected appliances consume 100W, some of the solar energy can effectively support the load while the remaining available energy can contribute toward battery charging.

If the load is greater than the available solar input, the battery may still discharge even though solar charging is active.

Can I Charge Itel Power Tank During the Rain?

Solar panels can produce electricity in cloudy or rainy conditions, but output may be considerably reduced.

More importantly, the electrical equipment and connections should be protected from water according to their specified environmental ratings.

Do not expose charging connectors or the Power Tank to water beyond what the manufacturer permits.

Can I Leave the Solar Panel Connected All Day?

A properly configured solar panel can remain connected during daylight charging when the system is installed and operated according to the manufacturer’s specifications.

The Power Tank’s charging controller is designed to manage supported solar input.

Nevertheless, ensure that the PV voltage and current remain within the permitted limits.

Does Itel Power Tank Need Sunlight Directly?

Solar panels do not necessarily require perfectly direct overhead sunlight to generate electricity, but stronger available sunlight generally produces more energy.

A shaded panel will typically produce much less than an unobstructed panel.

For faster charging, position panels where they can receive strong sunlight for as much of the useful solar period as possible.

Itel Power Tank Solar Charging Benefits

Charging the Power Tank with solar can provide several practical benefits for Nigerian users:

• Reduced dependence on grid electricity
• Renewable energy charging
• Daytime battery replenishment
• Quiet backup operation
• No petrol required for battery operation
• Portable energy storage
• Useful emergency backup
• Suitable for home-office applications
• Useful for shops and small businesses
• Can support routers, laptops, TVs, fans and other compatible loads

Itel Power Tank Solar Charging for Home

For home users, solar charging can help maintain stored energy during periods of grid interruption.

A typical setup might use the Power Tank for:

• LED lights
• Wi-Fi router
• Television
• Laptop
• Phone charging
• Small fan
• CCTV equipment

The total load should remain within the Power Tank’s output rating.

Itel Power Tank Solar Charging for Business

Small businesses can use the Power Tank as backup for:

• POS terminals
• Routers
• Laptops
• CCTV
• LED lighting
• Small electronics
• Networking equipment

Solar charging can replenish the battery during daylight hours while the stored energy can be used when grid electricity is unavailable.

Itel Power Tank Solar Charging for Remote Work

Remote workers can use solar energy to recharge their Power Tank during the day and use stored energy for laptops, routers and lighting later.

This can be useful where reliable grid electricity is not always available.

Itel Power Tank 1000Wh Solar Generator Price in Nigeria

Prices vary according to seller, stock, warranty, package and whether solar panels are included.

Current Nigerian listings show the commonly listed 1,000Wh unit around the ₦279,000 level on one current listing, while other listings and packages can be substantially higher.

A package containing compatible solar panels may cost more than the Power Tank alone.

Before payment, ask:

• Is the solar panel included?
• What panel wattage is included?
• What model is the Power Tank?
• What warranty is provided?
• What accessories are included?
• Is installation included?
• Is delivery available to my location?

Itel Power Tank 1000Wh Datasheet

The commonly listed IESS-05K10N configuration includes:

Specification	Details
Battery capacity	1,000Wh / 1kWh
Battery type	LiFePO₄
Continuous AC output	500W
Inverter	Pure sine wave
Solar controller	Built-in MPPT
Maximum PV input	Up to 400W
PV/MPPT range	Approximately 11–60V
AC output	230V
Frequency	50Hz
Solar charging	Yes
AC/grid charging	Yes
UPS function	Supported on documented configuration
Battery cycle rating	Up to approximately 6,000 cycles under specified conditions
Protection	Overload, short circuit, over-temperature and voltage protection

Specifications can vary between versions and regional configurations, so confirm the exact model’s datasheet before purchase.

Itel Power Tank Key Features

The commonly listed 1,000Wh configuration includes:

• 1,000Wh/1kWh LiFePO₄ battery
• 500W continuous pure sine-wave output
• Built-in MPPT solar controller
• Up to 400W PV input
• Solar charging
• AC/grid charging
• Multiple output options
• Digital battery-status display
• UPS-style functionality
• Battery-management system
• Overload protection
• Short-circuit protection
• Over-temperature protection
• Over-voltage protection
• Portable all-in-one design

Important Solar Compatibility Warning

Do not connect an unknown solar panel to the Power Tank simply because the connector fits.

A connector fitting does not prove electrical compatibility.

Always verify the solar panel’s:

• Voltage
• Current
• Wattage
• Voc
• Vmp
• Isc
• Imp

against the Power Tank’s specifications.

For the commonly documented configuration, the PV input is up to approximately 400W and the MPPT range is approximately 11–60V.

If you are uncertain about series/parallel panel configuration, ask a qualified solar installer to check it before connection.

Where to Buy Genuine Itel Power Tank in Nigeria

For buyers looking for an original Itel Power Tank in Nigeria, contact:

The Best Seller: Nature Links Nigeria Limited [NatureLinks.NG]

Accredited Distributor: Nature Solar Global Limited

CEO: Mr. Joseph Chikeleze

Call: 07049528019

WhatsApp: 09040054359

Shop Address: F1571 Upstairs (F-Line), Alaba International Market, Lagos State 🇳🇬

Before payment, confirm:

• Exact model
• Battery capacity
• Solar-input rating
• Solar-panel compatibility
• Current price
• Warranty
• Package contents
• Delivery arrangements

Frequently Asked Questions

1. How do I charge Itel Power Tank with solar?

Connect a compatible solar panel to the Power Tank’s designated PV/solar input using the correct cable. Make sure the panel voltage and wattage fall within the specifications of your exact model. The commonly listed 1,000Wh configuration supports up to approximately 400W PV input.

2. What size solar panel do I need for Itel Power Tank?

The commonly documented 1,000Wh model supports up to approximately 400W of solar/PV input. You can use a lower-wattage compatible panel, but charging will generally be slower. Always check the panel’s voltage as well as its wattage.

3. Can I use a 400W solar panel with Itel Power Tank?

A compatible 400W solar configuration is within the documented maximum PV input for the commonly listed 1,000Wh configuration. The panel’s voltage and current must also be within the permitted input specifications.

4. Does Itel Power Tank have a built-in MPPT?

Yes. The commonly listed 1,000Wh Itel Power Tank has a built-in MPPT solar charge controller.

5. Can I use two 200W solar panels?

Potentially, yes, but the panels must be configured so that the combined voltage, current and wattage remain within the Power Tank’s PV-input limits. Do not connect them in series or parallel without checking the electrical specifications first.

6. How long does Itel Power Tank take to charge with solar?

There is no fixed charging time because solar production changes throughout the day. A 1,000Wh battery receiving a theoretical 400W continuously would require about 2.5 hours, but real-world charging normally takes longer because sunlight and panel output vary.

7. Can I charge Itel Power Tank with solar and NEPA?

The commonly documented configuration supports both solar and AC/grid charging, and listed configurations support dual charging. The exact operating mode should be confirmed for your model.

8. Can I use a 100W solar panel for Itel Power Tank?

Yes, provided its electrical specifications are compatible. However, a 100W panel will charge a 1,000Wh battery considerably more slowly than a higher-capacity solar input.

9. Why is my Itel Power Tank not charging from solar?

Check sunlight, panel voltage, panel wattage, cable connections, connectors, shading and whether the battery is already full. If everything appears correct and charging still does not work, consult the seller or qualified technical support rather than experimenting with incompatible electrical connections.

10. Where can I buy Itel Power Tank and solar panels in Nigeria?

You can contact Nature Links Nigeria Limited / Nature Solar Global Limited at 07049528019 or WhatsApp 09040054359, or visit F1571 Upstairs (F-Line), Alaba International Market, Lagos State 🇳🇬 to confirm current availability, pricing, solar-panel options and compatibility.

Final Guide: How Do I Charge Itel Power Tank With Solar?

If you are asking “How do I charge Itel Power Tank with solar?”, the basic process is to use a compatible solar panel connected to the Power Tank’s designated PV input, while staying within the exact model’s voltage, current and wattage limits.

For the commonly listed 1,000Wh Itel Power Tank, the published configuration includes a built-in 400W MPPT solar charge controller/input, with a documented PV/MPPT voltage range of approximately 11–60V.

The most important buying and installation rule is:

Do not choose a solar panel based on wattage alone.

Check its voltage, current, Voc, Vmp and connector compatibility before connecting it.

A 100W, 200W, 300W or 400W compatible solar setup can all be useful, but higher available solar input generally provides more potential charging power, subject to the Power Tank’s maximum PV specifications and actual sunlight conditions.

Conclusion

Charging an Itel Power Tank with solar is designed to be straightforward because the commonly listed 1,000Wh configuration already includes an integrated MPPT solar charge controller. With up to approximately 400W of permitted PV input and an 11–60V documented MPPT range, compatible solar panels can be used to replenish the LiFePO₄ battery during daylight.

For Nigerian buyers, solar charging can provide an additional way to keep the Power Tank ready for use when grid electricity is unavailable. However, correct panel sizing is essential. Always verify voltage, current, wattage and connector compatibility before connecting a solar panel.

For genuine Itel Power Tank products, compatible solar panels, current prices and purchasing information, contact Nature Solar Global Limited, the accredited distributor in Nigeria, through 07049528019 or 09040054359 on WhatsApp, or visit F1571 Upstairs (F-Line), Alaba International Market, Lagos State 🇳🇬.